TM 5-3895-369-14
Table F-3. Fuel Hose Assemblies and Components.
Hose Assembly
Bulk Hose
Cutoff Length
Fitting
Fitting
Ferrule
Manufacturer's
Inches (mm)
A
Part Number
B
C
Part Number
6LOLA-6RFSX-
6LOLA
24 (610)
6LOC-6RFSX
6LOC-6RFSX
N/A
6RFSX-24
6LOLA-6FSX-
6LOLA
284-0610
284-0610
N/A
27 (686)
6SFX-27
NOTES.
1.
OBTAIN ALL COMPONENTS REQUIRED TO FABRICATE THE SUCTION HOSE ASSEMBLY.
2.
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED LENGTH.
3.
SLIDE FOUR CLAMPS OVER HOSE.
4.
PLACE FITTING A IN VISE.
5.
SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
6.
PLACE FITTING B IN VISE.
7.
SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
8.
SLIDE CLAMPS DOWN TO FITTING. LEAVE ABOUT 1/2 INCH BETWEEN CLAMPS AND BETWEEN FITTING AND END CLAMP.
9.
TIGHTEN CLAMPS.
Figure F-10. Additive Suction Hose.
F-11
