TM 5-3895-369-14
NOTES:
NOTE
TABLE F-2 LISTS SEVERAL CONFIGURATIONS OF HYDRAULIC HOSES. THE FOLLOWING FABRICATION INSTRUCTIONS
APPLY TO ALL OF THE LISTED CONFIGURATIONS.
OBTAIN ALL COMPONENTS REQUIRED TO FABRICATE DESIRED HOSE ASSEMBLY (TABLE F-2).
1.
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED LENGTH.
2.
SLIDE FERRULES C ON HOSE AS NECESSARY.
3.
PLACE FITTING A IN VISE.
4.
SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
5.
PLACE FITTING B IN VISE.
6.
7.
SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
8.
SLIDE ONE EACH FERRULE TO END OF HOSE UNTIL THEY ARE AGAINST FITTINGS A AND B.
9.
CRIMP FERRULES TO HOSE.
Figure F-8. Hydraulic Hoses.
Table F-2. Hydraulic Hose Assemblies and Components.
C u t o f f Length
Bulk Hose
Hose Assembly
Fitting
Fitting
Fitting
F a r t Number
I n c h e s (mm)
Manufacturer's
A
B
C
P a r t Number
16PCM-16FJX
16PCM-16FJX
16PCM-2F
16C13
126 (3200)
16C13-16FJX-
16FJX-126
16PCM-16FJX
16PCM-16FJX
16PCM-2F
16C13
119 (3023)
16C13-16FJX-
16FJX-119
288-1217
288-1217
12LOLA-12FJX-
12LOLA
124 (3150)
N/A
12FJX-124
16PC1F-C4
16-12FJX
16-12MP
110 (2794)
16C4
16C4-12FJX-
12MP-110
F-8
