TM 5-3895-369-14
1.
FABRICATE FROM THE FOLLOWING MATERIALS:
TWO M17138-1, 3/8 IN. x 1-1/2 IN. COLD ROLLED STEEL x 3-1/4 IN. LONG.
ONE M17138-2, 3/8 IN. x 1-1/2 IN. COLD ROLLED STEEL x 4-1/4 IN. LONG.
ONE M17138-3, 3/8 IN. X 1-1/2 IN. COLD ROLLED STEEL X 20 IN. LONG.
UNSAFE WELDING PRACTICES CAN CAUSE SERIOUS INJURY FROM FIRE, EXPLOSIONS, OR HARMFUL AGENTS.
ALLOW ONLY AUTHORIZED PERSONNEL TO WELD OR CUT METALS, AND FOLLOW SAFETY PRECAUTIONS IN TM 9-237.
PROTECTIVE CLOTHING AND GOGGLES MUST BE WORN; ADEQUATE PROTECTIVE EQUIPMENT USED, A SUITABLE
FIRE EXTINGUISHER KEPT NEARBY; AND REQUIREMENTS OF TM 9-237 STRICTLY FOLLOWED.
POSITION AND WELD TWO M17138-1 STEEL BARS TO M17138-2 STEEL BAR.
2.
3.
POSITION AND WELD M17138-2 STEEL BAR TO M17138-3 STEEL BAR.
4.
AU DIMENSIONS ARE IN INCHES.
Figure F-6. Vibration Damper Holder.
F-6
