TM 5-3895-369-14
NOTE
Skip step (64) if lower control lever was
not disassembled.
(64)
Install middle control lever (13) on bottom
control lever (14) with washer (12),
lockwasher (11), and screw (10).
NOTE
Ensure to align lower control lever and
control shaft scribe marks for proper
assembly.
(65)
Install bottom spring seat (9), lower
spring (8) top spring seat (7), and lower
control lever assembly (6).
NOTE
Ensure to align scribe marks on upper
control lever and control shaft for proper
assembly.
(66)
Install intermediate disc (5), upper control
lever (3), upper spring (4), and flange nut (1)
on control shaft (2). Tighten flange nut 60
to 86 lb-in. (7 - 10 N•m).
5-254
