Install lever shaft

TM-5-3895-369-14 Mixer Rotary Tiller Manual
Page Navigation
930

TM 5-3895-369-14 (55) Install two preformed packings (35) on control valve (34). (56) Install control valve (34) sealing washer (33) and adapter (32). Tighten control valve 173 to 259 lb-in. (20 - 29 N•m). Tighten adapter 204 lb-in. (23 N•m). (57) Install lever shaft (16). (58) Apply grease to preformed packing (26) and install preformed packing in housing cover (30). (59) Install housing cover (30) and four screws (29). Tighten screws 60 to 86 lb-in. (7 - 10 N•m). (60) If removed, install preformed packing (26) full load adjusting screw (25) washer (28) and nut (27). Tighten nut 52 to 78 lb-in. (6 - 9 N•m). (61) If removed, install two nuts (24) and set screws (23). Tighten nuts 52 to 78 lb-in. (6 - 9 N•m). (62) Install washer (22) and preformed packing (21) on lever shaft (16). NOTE Align manual lever and lever shaft scribe marks for proper assembly. (63) Install shim (20), spring (19), manual lever (15), lockwasher (18), and nut (17). 5-263

Privacy Statement
Press Release
Contact