TM 5-3895-369-14
(30)
Install control sleeve (71) on plunger
assembly (70).
NOTE
Ensure to align plunger groove with knock
pin in cam plate.
(31) Install plunger assembly (70).
(32) Apply grease to two preformed
packings (68).
(33) Immerse two springs (69) in
calibration fluid.
(34)
Install two springs (69) and preformed
packing (68).
(35)
Install distributor head (67) and four
screws (66). Tighten screws alternately 86 to
121 lb-in. (10 - 14 N•m).
5-257
