TM 5-3895-369-14
(20)
Measure end play again at gear end of
crankshaft (1) at position A. Normal
measurement is 0.005 to 0.010 in.
(0.13 - 0.25 mm). If above or below normal
measurement, correct with proper thrust
bearing. If measurement is still not within
normal limits, perform removal and
replace crankshaft.
NOTE
Follow-on Maintenance:
•
Install oil pan and suction tube (para 5-29).
•
Install gear housing (para 5-28).
•
Remove engine from stand (para 5-9).
END OF TASK
5-145
