TM 5-3895-369-14
5-16. ENGINE OIL SEALS REPLACEMENT (CONT).
c.
Installation.
•
•
(1)
(2)
NOTE
Both front and rear oil seals are
installed the same way. Rear oil seal
shown.
Pilot installation tool are supplied
with replacement seals.
Insert rear seal (1) in pilot and install rear
seal. Remove pilot.
Seat rear seal (1) using installation tool.
WARNING
Adhesive sealant causes immediate
bonding on contact with eyes, skin, or
clothing and also gives off harmful vapors.
Wear protective goggles and use in well-
ventilated area. If adhesive gets in eyes, try
to keep eyes open; flush eyes with water for
15 minutes and get immediate medical
attention.
(3)
Apply coat of sealing compound on crankshaft and outside diameter of new front seal.
(4)
Repeat steps (1) and (2) for front seal.
N O T E
Follow-on Maintenance:
•
Install flywheel (para 5-18).
•
Install vibration damper (para 5-15).
END OF TASK
5-150
