TM 5-3895-369-14
5-15. VIBRATION DAMPER REPLACEMENT (CONT).
C.
Installation.
(1)
Install damper (5) and spacer (4) on crankshaft (6) with four screws (3). Tighten screws incrementally
to 85 lb-ft (115 N•m) by tightening all four screws to 30 lb-ft (27 N•m), 50 lb-ft (68 N•m), and finally
85 lb-ft (115 N•m).
(2)
Install adaptor (2) with four screws (1). Tighten screws 30 lb-ft (41 N•m).
N O T E
Follow-on maintenance: Install drive belt (para 4-68).
END OF TASK
5-148
