TM 5-3895-369-14
5-16. ENGINE OIL SEALS REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Cleaning
c. Installation
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
Equipment Condition
TM or Para
Para 5-15
Condition Description
Vibration damper
removed.
Shop equipment, contact maintenance: truck
mounted
Para 5-18
Flywheel removed.
MateriaIs/Parts
Cloth, lint-free (item 12, appendix E)
Oil seals (2)
Compound, sealing (item 16, appendix E)
a.
Removal.
NOTE
Both front and rear oil seals are removed
the same way. Rear oil seal a shown.
(1)
Drill two holes 180° apart in rear seal (1)
and install two No. 10 sheet metal screws.
(2)
Using No. 10 sheet metal screws remove rear
seal (1). Discard rear seal (1) and No. 10
sheet metal screws.
(3)
Repeat steps (1) and (2) for front seal.
b.
Cleaning. Wipe off all areas where oil has leaked with lint-free cloth.
5-149
