F-17. CLUTCH
TM 5-3895-369-14
NOTES
1.
2.
3.
4.
5.
6.
7.
8.
9.
OBTAIN ENOUGH BULK HOSE, PN 4M2T, TO FABRICATE LUBRICATION HOSE.
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED LENGTH.
SLIDE FERRULES C ON HOSE AS NECESSARY.
PLACE FITTING A IN VISE.
SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING.
BACK OFF 1/4 TURN.
PLACE FITTING B IN VISE.
SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING.
BACK OFF 1/4 TURN.
SLIDE ONE EACH FERRULE TO END OF HOSE UNTIL THEY ARE AGAINST FITTINGS A AND B.
CRIMP FERRULES TO HOSE.
Figure F-16. Clutch Lubrication Hose.
F-15
