Table F-2. Hydraulic Hose Assemblies and Components

Table F-2. Hyrdaulic Hose Assemblies and Components - CONT

Table F-3. Fuel Hose Assemblies and Components

TM-5-3895-369-14 Mixer Rotary Tiller Manual
Page Navigation
1259

F-10. FUEL TM 5-3895-369-14 Table F-2. Hydraulic Hose Assemblies and Components - CONT. Hose Assembly Manufacturer’s Part Number Bulk Hose Ferrule Part Number Cutoff Length Inches (mm) Fitting Fitting A B C 4MIT-6MP- 4MIT 32 (813) 4-6MP 6MP-32 4MIT-6MP- 4MIT 130 (3302) 4-6MP 4MP-130 4CIT-4MP-6MP-96 4C1T 96 (2438) 4-6MP 4PC1F-M1A N/A 4-4MP 4PC1F-M1A 4-4MP 4PC1FA NOTES: 1. OBTAIN AU COMPONENTS REQUIRED TO FABRICATE DESIRED HOSE ASSEMBLY (TABLE F-3). 2. USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED LENGTH. 3. PLACE FITTING A IN VISE. 4. SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN. 5. PLACE FITTING B IN VISE. 6. SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN. Figure F-9. Fuel Hoses. F-10

Privacy Statement
Press Release
Contact