F-21. BATTERY
TM 5-3895-369-14
NOTES.
1.
Obtain all components required to fabricate desired battery cable (Table F-5).
2.
Use a fine toothed hacksaw or suitable cutting device, and cut cable to indicated length.
3.
Remove about 1 in. (25 mm) of insulation from each end of cable.
3.
Slide terminal protectors A and B over cable as indicated.
4.
Place lug A on cable.
5.
Place lug B on cable.
6.
Crimp lugs on cables.
Figure F-20. Battery Cable.
Table F-5. Battery Cables and Components.
Battery Cable
Manufacturer’s
Part Number
Bulk Cable
Cutoff Length
Part Number
Inches (mm)
74002286
8020-100B
43 (1092)
74002285
8120-100R
48 (1219)
74002287
8120-100R
15-1/2 (394)
Battery Cable
Terminal
A
Battery Cable
Terminal
B
4020-005N
4820-005F
4020-005P
4020-005N
4020-005P
4820-005F
Terminal
Protector
C
5724-005B
5724-005R &
5724-005B
5724-005R
F-19
