F-14. CLUTCH
F-13. GROUNDSPEED
TM 5-3895-369-14
NOTES:
1.
OBTAIN ENOUGH 1/2 IN. (13 MM) THICK RUBBER STOCK, PN 41-1255-11, TO FABRICATE A SENSOR.
2.
CUT 2-5/8 IN. BY 1-1/2 IN (87 MM BY 38 MM) WIPER FROM RUBBER STOCK AS INDICATED.
3.
CUT 3/8 IN. (10 MM) WIDE BY 1 IN. (25.4 MM) LONG HOLE IN CENTER OF WIPER AS INDICATED.
Figure F-12. Groundspeed Sensor Wiper.
NOTES:
1.
OBTAIN ENOUGH 1/4 IN. (6 MM) THICK RUBBER STOCK, PN 41-1254-18, TO FABRICATE CLUTCH PAD.
2.
CUT 4 IN. BY 2-1/2 IN. (102 MM BY 64 MM) CLUTCH PAD FROM RUBBER STOCK AS INDICATED.
3.
CUT TWO 1/2 IN (13 MM) DIAMETER HOLES IN CLUTCH PAD AS INDICATED.
Figure F-13. Clutch Pad.
F-13
