F-20. DUST
TM 5-3895-369-14
The dust cap chain is used in two places. The chain length is the same for each application. Split rings are used to
attach the chain to other components. One application requires two split rings and the other requires one.
1.
OBTAIN ENOUGH BULK CHAIN, PN 54T83424, TO FABRICATE BOOM CHAIN TO DESIRED LENGTH.
2.
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT CHAIN TO DESIRED LENGTH.
3.
INSTALL REQUIRED NUMBER OF SPLIT RINGS, PN T29-09, ON ENDS OF CHAIN AS INDICATED.
Figure F-19. Dust Cap Chain.
F-18
