F-9. HYDRAULIC
TM 5-3895-369-14
NOTES:
N O T E
TABLE F-2 LISTS SEVERAL CONFIGURATIONS OF HYDRAULIC HOSES. THE FOLLOWING FABRICATION INSTRUCTIONS
APPLY TO ALL OF THE LISTED CONFIGURATIONS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
OBTAIN ALL COMPONENTS REQUIRED TO FABRICATE DESIRED HOSE ASSEMBLY (TABLE F-2).
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED LENGTH.
SLIDE FERRULES C ON HOSE AS NECESSARY.
PLACE FITTING A IN VISE.
SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
PLACE FITTING B IN VISE.
SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
SLIDE ONE EACH FERRULE TO END OF HOSE UNTIL THEY ARE AGAINST FITTINGS A AND B.
CRIMP FERRULES TO HOSE.
Figure F-8. Hydraulic Hoses.
Table F-2. Hydraulic Hose Assemblies and Components.
H o s e A s s e m b l y
Manufacturer’s
Part Number
Bulk Hose
Cutoff Length
Fart Number
Inches (mm)
Fitting
Fitting
F i t t i n g
A
B
C
16C13-16FJX-
16FJX-126
16C13-16FJX-
16FJX-119
12LOLA-12FJX-
1 2 F J X - 1 2 4
16C4-12FJX-
12MP-110
16C13
126 (3200)
16C13
119 (3023)
1 2 L O L A
124 (3150)
16C4
110 (2794)
16PCM-16FJX
16PCM-16FJX
288-1217
16-12FJX
16PCM-16FJX
16PCM-16FJX
288-1217
16-12MP
16PCM-2F
16PCM-2F
N / A
16PC1F-C4
F-8
