TM 5-3895-372-34
(4)
Disconnect oil filter inlet hose (2, fig. 2-5) at swivel nut (1).
(5)
Remove four screws (3) from cap (6) and remove oil filter assembly (8) with piping attached.
(6)
Remove four screws (4) from cap (5) and disconnect pump outlet from the oil pump.
(7)
Tie return line, relief valve and bypass line out of the way.
(8) Loosen the four base plate bolts (9 and 19, fig. 2-7), six flatwashers (10), four lock-
washers (12) and four nuts (15). Do not remove.
(9)
Loosen the two adjusting lock screws (13) and back them off the maximum distance.
LEGEND:
1.
SWIVEL NUT
2.
INLET HOSE
3.
SCREW (4)
4.
SCREW (4)
5.
CAP
6.
CAP
7.
ELEMENT
8.
OIL FILTER ASSEMBLY
Figure 2-5. Oil Filter and Return Line Disconnect.
2-18
