TM 5-3895-369-14
(13) If removed, install eight sleeves (29) in front gear plate (28).
(14) Align matchmarks and install front gear plate (28).
(1.5) If removed, install retaining ring (27) in shaft coupling (26).
(16) Install two preformed packings (17) in two pressure plates (16).
(17) Install retaining ring (25), two preformed packings (24 and 23) on connector plate (21).
(18) Install retaining ring (20), two preformed packings (19 and 18) on connector plate (21).
Hole at top of bearing plate extends only part way. This side must face front gear plate or damage may
result to pump.
(19) Align matchmarks and install connector plate (21) loosely.
(20) Install two preformed packings (17) in pressure plate (16).
(21) Install pressure plate (16) on connector plate (21).
5-489