TM 5-3895-369-14
5-82. HYDRAULIC GEAR PUMP ASSEMBLY PUMP (CONT).
(10) Remove pressure plate (16).
(11) Remove and discard two preformed packings (17) from pressure plate (16).
(12) Remove two preformed packings (18 and 19), and retaining ring (20) from connector
plate (21). Discard preformed packings and retaining ring.
(13) Remove connector plate (21) and four preformed packings (22). Discard preformed packings.
(14) Remove preformed packings (23 and 24) and retaining ring (25) from front side of connector plate (21).
Discard retaining ring and preformed packings.
(15) Remove shaft coupling (26) from inside connector plate (21).
(16) If necessary, remove retaining ring (27) from shaft coupling (26).
(17) Remove front gear plate (28).
(18) If necessary, remove and discard eight sleeves (29).
5-484