TM 5-3895-369-14
(19) Remove idler gear (30), drive gear (31), pressure plate (32), two preformed packings (33 and 34), and
retaining ring (35). Discard preformed packings and retaining ring.
(20) Remove and discard two preformed packings (36) from pressure plate (32).
(21) If damaged, remove four studs (37) from flange plate (38).
(22) Remove retaining ring (39) and shaft seal (40). Discard shaft seal.
(23) Remove plug (41) preformed packing (42)
and spring (43) from cover plate (4).
Discard preformed packing.
(24) Remove plug (44) and preformed
packing (45). Discard preformed packing.
(25) Remove cap (46), plug (47), spring (48) and
two preformed packings (49 and 50).
Discard preformed packings.
(26) Remove locknut (51), preformed
packing (52), setscrew (53), spring (54), and
cone (55) from plug (47). Discard
preformed packing.
5-485