TM 5-3895-369-14
If new gear plate is used, dowels must be installed or damaged will result to pump.
(24) Install idler gear (13).
(25) Install two preformed packings (15) in pressure plate (12).
(26) Install pressure plate (12) on gears (13 and 14).
(27) If removed, install eight sleeves (11) in rear gear plate (5).
(28) Align matchmarks and install rear gear plate (4) and pressure plate (5).
(29) Install retaining ring (9) and two preformed packings (7 and 8) in cover plate (4).
(30) Install cover plate (4) against rear
gear plate (5) with four lockwashers (2)
and nuts (2) on pump assembly (1).
Tighten nuts.
NOTE
Follow-on Maintenance: Install hydraulic gear pump assembly (para 5-81).
END OF TASK
5-491