TM 5-3895-369-14
(42) If tooth contact is like pattern E, move
INCORRECT PATTERN
pinion away from ring gear (14) by adding
shims, then repeat step (32).
PATTERN TOO CLOSE OR OFF TOOTH ROOT.
PATTERN E
(43) When proper ring gear pattern is achieved,
tighten differential bearing cap screws (34)
150 to 160 lb-ft (200 - 220 Nm).
NOTE
Bearing adjuster may be turned slightly to
align lock.
(44) Install two adjuster locks (37) and cotter
pins (38) on bearing caps (32 and 33).
NOTE
Follow-on Maintenance: Install differential assembly (para 5-68).
END OF TASK
5-415
