TM 5-3895-369-14
(9) Install spacer (87) and lever (86) with
lockwasher (85) and nut (84).
(10) Install aperture plug (83) and three
preformed packings (82) in control (79).
(11) Hook control arm (80) and install
gasket (81) and control (79) on pump (3)
with nine washers (78) and screws (77).
NOTE
If thrust washer will not stay in place, apply
grease.
(12) Install thrust plate (66) in pump (3).
(13) Install bearing (65) on shaft (64).
(14) Install shaft (64) in pump (3).
(15) Position pump (3) on servo housings (57).
(16) If removed, install pin (63) in front
cover (61).
(17) Install gasket (62), front cover (61), and
lifting bracket (60) on pump (3) with 12
washers (59) and screws (58).
5-333
