TM 5-3895-369-14
(18) Install eight pistons (52) in retainer (53).
(19) Install pin (56), six springs (55) and retaining
guide (54) on cylinder block (51).
(20) Install eight pistons (52) in cylinder
block (51).
NOTE
Splines on shaft, retaining guide, and
cylinder block only line up one way.
(21) Install cylinder block (51) in pump (3).
(22) Install spacer (50) and rear bearing (49) in
pump (3).
(23) Install bearing plate (46) and preformed
packing (47) in pump (3).
(24) If removed, install two pins (48).
5-334