TM 5-3895-369-14
(f)
Connect wire (12) to terminal (28) with
lockwasher (27) and nut (26).
(4) To install oil pressure gauge, proceed as
follows:
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(a) Apply silicone sealant around oil
pressure gauge (23).
(b) Install oil pressure gauge (23) in
instrument panel (9) with two
lockwashers (25) and nuts (24).
(c)
Install gauge lamp (22) in oil pressure
gauge (23).
(d) Connect wire (20) to terminal (21) with
lockwasher (19) and nut (18).
4-289