TM 5-3895-369-14
(2) To install voltmeter, proceed as follows:
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
Apply silicone sealant around
voltmeter (48).
Install voltmeter (48) in instrument
panel (9) with two lo&washers (50)
and nuts (49).
Install gauge lamp (47) in
voltmeter (48).
Connect wire (16) to terminal (46) with
lockwasher (45) and nut (44).
(e) Connect wire (12) and gauge lamp
wire (42) to terminal (43) with
lockwasher (41) and nut (42).
4-287