TM 5-3895-369-14
4-74. INSTRUMENT PANEL GAUGE REPLACEMENT (CONT).
(3) To install water temperature gauge, proceed
a s follows:
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(a) Apply silicone sealant around water
temperature gauge (37).
(b) Install water temperature gauge (37) in
instrument panel (9) with two
lockwashers (39) and nuts (38).
(c) Install gauge lamp (36) in water
temperature gauge (37).
(d) Connect wire (34) to terminal (35) with
lockwasher (33) and nut (32).
(e) Connect wire (16) to terminal (31) with
lockwasher (30) and nut (29).
4-288