TM 5-3895-369-14
(5) To install hour meter, proceed as follows:
Adhesive causes immediate bonding on
contact with eyes, skin, or clothing and also
gives off harmful vapors. Wear protective
goggles and use in well-ventilated area. If
adhesive gets in eyes, try to keep eyes open;
flush eyes with water for 15 minutes and
get immediate medical attention.
(a) Apply silicone sealant around hour
meter (8).
(b) Install hour meter (8) in instrument
panel (9) with bracket (7),
lockwasher (6), and nut (5).
(c) Connect wire (3) to terminal (4).
(d) Connect wire (1) to terminal (2).
NOTE
Follow-on Maintenance: Install instrument panel (para 4-73).
END OF TASK
4-291