TM 5-3895-342-12
NOTE: ADJUST BELT AFTER INSTALLATION TO
1/2 INCH DEFLECTION MID WAY BETWEEN
b. Cleaning and Inspection.
SHEAVES.
(1) Clean all parts with a cleaning solvent.
(2) Inspect pump for cracks and other defects.
Replace defective pump.
c. Installation. Install the pump in reverse of
instructions on figure 4-37.
4-51. Three-Way Valve
a. Removal. Remove the three-way valve as
instructed on figure 4-38.
Figure 4-36. Pump belt removal.
ME3895-342-12/4-36
b. Inspection. Inspect the belt for excessive
wear and fraying. Replace belt as necessary.
c. Installation. Install the pump belt in reverse
of instructions in sub paragraph a above.
d. Adjustment. Adjust the pump belt as
instructed on figure 4-36.
4-50. Pump
a. Removal.
(1) Remove the pump belt (para 4-49).
(2) Remove the pump as instructed on figure 4-37.
1. LOOSEN SETSCREW AND REMOVE VALVE
WRENCH.
2. LOOSEN HOSE CLAMPS AND DISCONNECT
HOSES.
3. REMOVE NUTS (4) AND WASHERS SECURING
U-CLAMPS (2) AND REMOVE VALVE.
ME3895-342-12/4-38
Figure 4-38. Three-way valve removal.
b. Cleaning and Inspection.
(1) Clean the valve with a cleaning solvent.
(2) Inspect the valve for leaks, cracks and
other defects. Replace a defective valve.
c. Installation. Install the valve in reverse of
instructions on figure 4-38.
1. LOOSEN HOSE CLAMP AND DISCONNECT
HOSE.
2. REMOVE NUTS (4), WASHERS AND BOLTS,
AND REMOVE PUMP.
ME3895-342-12/4-37
Figure 4-37. Pump removal.
4-22
