TM 5-3895-372-34
Figure 2-26. Remove /Install Access Panels
(8)
Install brace (2, fig. 2-24) to support rail (22) with bolts, washers, and nuts (15 and 20).
(9)
Install nuts (10) and ball joints (9) on rod (11), if removed.
(10)
Install nuts and washers (12); tighten.
(11)
Install nuts (6) on rods (7), if removed.
(12)
Install two washers and cotter pins (8).
(13)
Install clutch lever (21) and bolt and washer (18). Tighten bolt.
(14)
Adjust clutch. (Refer to TM 5-3895-372-20.)
(15)
Install access covers (1, fig. 2-22).
2-41
