TM 5-3895-372-34
Figure 2-20. Bin to Chassis Frame Bolts.
(33) Using a suitable hoist, lift bins off of vehicle (fig. 2-21).
c. Installation.
(1) Using a suitable hoist set bins in place on vehicle (fig. 2-21).
(2) Install twenty bolts, lockwashers and nuts (1, fig. 2-20). Tighten bolts securely.
(3) Install four bolts, nuts, and lockwashers (1, fig.2-19). Tighten securely.
(4) Install four bolts, nuts, and lockwashers (1, fig. 2-18). Tighten securely.
(5) Install two bolts, lockwashers, and nuts (1, fig. 2-17). Tighten securely.
(6) Secure any cables to frame with ties that were removed.
(7) Set pump access covers in place and install nine bolts, nuts, lockwashers and tighten securely.
(8) Install shaft (2,
(9) Install keys (11 and 12) and tighten four setscrews (10 and 13).
(10) Install two bearings (1), shaft (2), eight capscrews and washers (3). Tighten securely.
(11) Install two keys (4 and 5) and right angle drive coupling (6).
(12) Install chain drive sprocket (8) and admix drive sprocket (7).
(13) Install retaining ring (15) and tighten setscrew.
(14) Install shaft (4, fig. 2-15), belt tensioning device (2), six capscrews and washers (1), retaining ring (3), and
spacers. Tighten setscrew and six capscrews securely.
2-33
