TM 5-3895-372-34
Figure 2-21. Lifting Bins.
(15) Set left and right rear fenders in place. Install twenty-one bolts, lockwashers and nuts on each fender and tighten
bolts securely.
(16) Set rear accessory frame in place and secure with hexagon bolt, lockwashers, and nut (3, fig. 2-14).
(17) Install four hexagon bolts, lockwashers, and nuts (2) and tighten securely.
(18) Install two hexagon bolts, lockwashers, and nuts (1) and tighten securely.
(19) Install cable (2, fig. 2-13), box (3) and secure with two bolts, nuts, lockwashers (1) and tighten securely.
(20) Install microswitch (3, fig. 2-12) and secure with four capscrews and lockwashers (2). Install cable ties (1).
(21) Install control box cover (1, fig. 2-11) and secure with four screws (2).
2-34