TM 5-3895-372-34
(17) Loosen setscrew and turn retaining ring (3, fig. 2-15) counterclockwise and remove from shaft. Remove six
capscrews and washers (1) and remove belt tensioning device (2) from vehicle.
(18) Remove shaft (4) from vehicle. (191 Loosen two setscrews and remove retaining ring (15, fig. 2-16).
(20) Remove right angle drive coupling (6).
(21) Remove two keys (4) and (5).
(22) Loosen four set screws (10) and (13).
(23) Remove two keys (11) and (12).
(24) Slide two sprockets (9) and (14) inward.
(25) Remove two sprockets (7) and (8).
Figure 2-15. Remove/Install Belt Tensioning Device.
2-29