TM 5-3895-372-10
c. Lower the side panels. Flip the latches (fig 2-13) downward to lock the panels In place.
d. If you are using non-potable water (not fit for drinking) you must fill through the square opening. (There is a
cylindrical strainer in this opening). Otherwise you may use whichever fill hole is easier (fig. 2-15).
Figure 2-15. Filling the Water Tank
NOTE
If the strainer in the square opening is clogged, lift it out and wash it with water.
e. Fill the tank to the desired level. You can tell how full the tank is by watching the water level in the sight gage.
Next to the tube are markings telling you how many gallons are in the tank (fig. 2-15).
TA 075481
2-25
