TM 5-3895-372-10
f. When the tank has been filled, rinse out the inlet strainer (fig. 2-15) (if you used it). Put it back In the square
opening.
g. Put the fill cap (fig. 2-15) back onto the fill opening
2-5. Filling the Aggregate Bins.
a. Remove the tarpaulin by disconnecting the tie-down ropes from the hooks on the sides of the bins (fig. 2-16).
Figure 2-16. Tarpaulin.
CAUTION
Be sure there is enough clearance above the bins to load the aggregates. Be sure that all the
aggregates fall into the correct bin.
TA 075482
2-26
