TM 5-3895-369-14
5-24. CAMSHAFT REPLACEMENT/REPAIR (CONT).
(14)
Lubricate thrust plate (6) with grease.
(15)
Install thrust plate (6) on camshaft (2).
(16)
Install camshaft gear (4) against thrust
plate (6).
(17)
Install camshaft (2) completely in cylinder
block (6).
(18) Install two screws (8). Tighten screws
216 lb-in (24 N-m).
(19)
Measure camshaft gear (4) end play at
position D. Normal measurement is 0.007 to
0.011 in. (0.17 - 0.29 mm). If above or below
normal measurement, replace thrust plate.
5-178
