TM 5-3895-369-14
(8)
(9)
(10)
Lubricate camshaft (2) bores, journals, and
lobes with grease.
If removed, install key (3) in camshaft (2).
Install camshaft (2) 2/3 of the way in cylinder
block (leaving 1/3 outside of block).
Do not overheat gear or irreparable
damage to gear will result.
(11)
Heat camshaft (4) in suitable oven at 250°F
(121°C) for 45 minutes.
Wear protective gloves when installing
camshaft gear. Gear is hot and can cause
severe burns to personnel.
(12)
(13)
Install camshaft gear (4) on camshaft (2)
loosely.
Check and ensure timing marks on camshaft
gear (4) and crankshaft gear (5) are aligned.
5-177
