TM 5-3895-369-14
c.
Installation.
NOTE
Perform steps (4 and 5) only if access cover was alone removed.
(1)
If removed, install ring seal (10) and access cover (9) in gear cover (5).
(2)
Install oil seal (8).
(3)
Install cover gasket (7).
(4)
Install gear cover (5) on gear housing (6) with 19 screws (3 and 4). Tighten screws 216 lb-in (24 N•m).
(5)
Install belt guide (2) with screw (1). Tighten screw 216 lb-in (24 N•m).
NOTE
Follow-on maintenance: Install vibration damper (para 5-15).
END OF TASK
5-183
