TM 5-3895-369-14
5-25. TAPPET COVER REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Cleaning/Inspection
c. Installation
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
Wrench, torque
Materials/Parts
Cloth, lint-free (item 12, appendix E)
Grommet seals (4)
Push rod cover gasket
Equipment Condition
TM or Para
Condition Description
Para 4-32
Breather tube removed.
Para 4-47
Fuel drain hoses
removed.
Para 4-51
Fuel filter head removed.
Para 5-40
Fuel injection pump
removed.
General Safety Instructions
If engine has previously been in operation, allow
time for engine to cool before performing
procedure.
a. Removal.
NOTE
Two of six screws were removed with
fuel hoses.
(1)
Remove four screws (1) and grommets (2).
Discard grommets.
(2)
Remove tappet cover (3) from engine
block (4).
(3)
Remove breather baffle (5) and gasket (6)
from tappet cover (3). Discard gasket.
5-180
