TM 5-3895-369-14
5-23. ROCKER ARM ASSEMBLY REPLACEMENT/REPAIR (CONT).
e.
Installation.
(1)
Lubricate push rod (4) sockets and valves
with engine oil and install 12 push rods in
cylinder head (5).
(2)
Install six rocker arm assemblies (3) with 12
screws (1 and 2). Tighten screws (1)
alternately at 216 lb-in (24 N•m). Tighten
screws (2) in following steps:
(a)
Step 1: 29 lb-ft (39 N•m).
(b) Step 2: 62 lb-ft (84 N•m).
(c)
Step 3: 92 lb-ft (125 N•m).
NOTE
Follow-on Maintenance:
•
Check torque on other cylinder head screws (para 5-12).
•
Perform valve and rocker arm adjustments (para 4-31).
END OF TASK
5-172
