TM 5-3895-369-14
APPENDIX F
MANUFACTURED ITEMS LIST
This appendix includes complete instructions for manufacturing or fabricating items needed for Unit Support
Maintenance. A part number index in alphanumeric order is provided for cross-referencing the part number of the
item to be manufactured to the figure which covers fabrication criteria. All bulk materials needed for manufacture of
an item are listed by part number or specification number in a tabular list on the illustration.
NOTES:
FABRICATE FROM 3 IN. x 5# CHANNEL.
1.
CUT CHANNEL TO 14 IN. LONG.
2.
DRILL TWO HOLES 11/16 IN. DIAMETER.
3.
DRILL 1-1/4 IN. DIAMETER HOLE.
4.
PROVIDE TWO MS51967-21, 5/8-11 x 4-1/2 IN. HEX HEAD SCREWS (SHIPPED LOOSE WITH FABRICATION).
5.
PROVIDE 5/8-11 IN. HEX NUT (SHIPPED LOOSE WITH FABRICATION).
6.
PROVIDE PINION NUT -- PART NUMBER 19205 (CAGE 81118).
7.
ALL DIMENSIONS ARE INCHES.
8.
Figure F-l. Rotor Drive Pinion Puller
F-l