TM 5-3895-369-14
(14) Loosen two setscrews (22) and remove retaining ring (23). bearing assembly (24), and drive shaft (25) from
backplate (7).
(15) If damaged, remove two setscrews (22) from bearing assembly (24).
(16) Remove packing set (26) and packing washer (27) from backplate (7). Discarding packing set.
NOTE
Only remove sleeve bearings if necessary/damaged.
(17) Remove sleeve bearings (28 and 29) from backplate (7).
(18) Remove two keys (30 and 31) from drive shaft (25).
(19) Remove 14 screws (32), faceplate (33), gasket (34), and two dowel pins (35) from case (8). Discard gasket.
(20) Loosen lock and seal nut (36). Remove adjusting screw (37) and nut from plug cap (38). Discard lock and
seal nut.
5-519
