TM 5-3895-369-14
(5) Install cross shaft (7) and assembled parts in
left-hand case half (2).
(6) Turn differential pinions (8) to make sure
they turn freely.
(7) Install side gear (10) and thrust washer (11)
on differential pinions (8).
(8) Align matchmarks and install right-hand
case half (4) on left-hand case half (2).
NOTE
Place differential case in holding device
before tightening locknuts.
(9) Install eight screws (12) and locknuts (13).
Alternately tighten locknuts 80 to 90 lb-ft
(108 - 122 Nm).
NOTE
Rivets, securing ring gear to differential
case, require 20 to 25 U.S. tons (18.1 - 22.7
metric tons) of pressure per rivet. Make
sure you use a suitable hydraulic or
mechanical press.
(10) Install ring gear (14) to left-hand case
half (2) with 14 rivets (15).
5-405
