TM 5-3895-369-14
(14) Remove idler gear (33) and shaft (34) from
base (23).
(15) Remove drive gear (35), shaft (36), and
key (37).
(16) Remove cap (38), preformed packing (39),
spring (40), and poppet (41). Discard
preformed packing.
(17) If damaged, remove roll pin (42).
(18) Remove two charge check valves (43) and
preformed packing (44) from end cap (17).
Discard preformed packing.
(19) Remove bearing seat (45).
(20) Remove bearing plate (46) and preformed
packing (47) from pump (3). Discard
preformed packing.
(21) If damaged, remove two pins (48).
(22) Remove rear bearing (49) and spacer (50)
from pump (3).
5-326