TM 5-3895-369-14
d. Adjustment.
(1) Adjust pre-stroke as follows:
(a) Remove bleeder valve (1) and install
dial gauge.
(b) Set injection pump to top dead center
and reset dial gauge to zero.
(c) Rotate injection pump once and read
dial gauge. If measurement is within
limits go to step (f). If measurement is
not within specified range, do steps (1)
to (4), (11), (17), (22) to (26), (28),
(30), (31) (a), (32), and (33) of a.
Disassembly to remove shim.
(d) Do steps (26), (27), (28) (d), (29), (30),
(31) (35), (37) to (40), (47), (48), (54),
(59), (65), and (66) of c. Assembly to
install correct size shim.
(e) Rotate injection pump once and read
dial gauge to ensure correct
pre-stroke adjustment.
Remove dial gage and install bleeder valve (1). Tighten bleeder valve 121 to 174 lb-in (14 - 20 Nm).
(f)
5-265