TM 5-3895-369-14
(c) Remove nut (53), washer (54), and
governor shaft (55).
(d) Remove flyweight holder assembly
(57) washer (58) and shim (59).
(c) Remove plug (64) from sleeve (60).
Install correct six plug (64).
(f)
Install shim (59) washer (58), flyweight
(g)
holder assembly (57), and governor
shaft (55).
(h) Repeat steps (36) and (37).
Remove two screws and block gage.
(i)
(47) Install preformed packing (49) and washer
(48) on control shaft (2).
(48) Install pin seat (52), retaining pin (51),
governor spring (50) and control shaft (2).
5-261