TM 5-3895-369-14
b. Cleaning/Inspection.
(1) Clean plug and around hole.
(2) Inspect all threads for crossed or peeled
condition.
(3) Replace damaged plug.
(4) Dispose of drained fluids according to local
regulations.
c.
Filling.
NOTE
Arrow on face of wheel end must be
pointing down to fill wheel end.
(1) Fill wheel end (1) with gear oil, as specified
by MIL-L-2105C, through fill hole (2).
(2) Wheel end (1) is full when oil level is just
below fill hole (2).
(3) When wheel end (1) is full, install fill/drain
plug (3) in drive assembly (2).
END OF TASK
4-565