TM 5-3895-369-14
4-180. STORAGE INSTRUCTIONS (CONT).
Preservation oil will damage non-metallic air filter parts. Care should be used when applying
preservation oil to air filter non-metallic parts.
(c)
Dip removed metallic air cleaner components in preservative oil (item 40, appendix E).
(d) Install air cleaner components (para 3-8).
(e) Wrap air intake restriction indicator with barrier material (item 28, appendix E).
(f)
Disconnect air inlet tube from outlet side of air cleaner (para 4-43).
(g) Disconnect exhaust tube from turbocharger (para 4-58).
(h) Fog inside of air inlet tube toward turbocharger with about one ounce of preservative oil (item 42,
(i)
Install air inlet tube (para 4-43).
(j)
Fog inside of turbocharger from exhaust side with about two ounces of preservative oil (item 40,
(k) Fog exhaust tube toward muffler with MIL-L-21260 preservation oil.
(1)
Install exhaust tube (para 4-58).
(7) Prepare exhaust system for long term storage.
(b) Repaint marred and damaged areas of Muffler And Exhaust Pipes.
(c)
Coat unpainted surfaces of muffler and exhaust pipes with P-19 preservative oil (item 47,
(d) Coat interior surfaces of muffler and exhaust pipes with preservative oil (item 40, appendix E).
(8) Prepare drive belt and pulleys for long term storage:
(a) Completely loosen tension of drive belt.
(b) Coat surfaces of unpainted pulley grooves with preservative oil (item 41, appendix E).
(c) Attach tag to drive shaft pulley stating: "BELT TENSION RELIEVED - ADJUST BEFORE
STARTING ENGINE."
(9) Prepare batteries for long term storage:
(a) Remove battery cables (para 4-90).
(b) Coat battery terminals and cable connectors with P-6 preservative oil (item 41, appendix E).
4-568
