TM 5-3895-369-14
(5) Install fuel return tubes and hose as follows:
(a) Install two sealing washers (28). fuel return tube (24), and banjo screw (27) on injection pump (4).
Tighten screw 78 lb-in (9 Nm).
(b) Install fuel return tube (24) with screw (26). Tighten screw 216 lb-in (24 Nm).
(c) Install grommet seal (25) and tee (16)
on fuel return tube (24).
(d) Install grommet seal (23) in fuel return
tube (21).
(e) Install fuel return tube (21) on tee (16).
Install tube (21) with screw (22).
(f)
(g) Install nipple (19) and fuel return
hose (18).
(6) Install fuel injector return tube as follows:
(a) Install grommet seal (17) on fuel
injector return tube (14).
(b) Install fuel injector return tube (14) on
tee (16).
4-215
