TM 5-3895-369-14
4-47. FUEL LINES AND FITTINGS REPLACEMENT (CONT).
(4) Tag, mark, and remove fuel tubes from filter head as follows:
(a) Remove screw (29) and sealing washer (30). Discard sealing washer.
(b) Remove banjo screw (31), two sealing washers (32), and fuel tube (33) from filter head (34). Discard
sealing washers.
(c) Loosen connector (35) and remove fuel tube (36) from injection pump (4).
(d) Remove fuel tube (33), two grommet seals (37), and adaptor (38) from fuel tube (36). Discard
grommet seals.
(e) Loosen connector (39) and remove banjo screw (40), two sealing washers (41), and fuel tube (42)
from filter head (34) and lift pump (43). Discard sealing washer.
4-210
